Whats about Bronze Copper Spare Parts？

2026-02-04

When it comes to keeping your crusher running at peak performance, copper parts play a critical yet often understated role. These components, including eccentric bushings, socker liner, main frame pin bushing, trush washer/bearing and countershaft bushings are the quiet champions inside the crushing.

Main components include:

1. Eccentric Bushing: Installed inside the eccentric steel sleeve, located on the outside of the main shaft. Its core function is to support and guide the movement of the eccentric shaft, protecting the main shaft and eccentric steel sleeve, preventing wear of the eccentric steel sleeve, and ensuring smooth and efficient crushing action.

2. Socker Liner: Installed at the top of the main shaft. Its working surface has oil grooves and mates with the spherical surface of the moving cone, supporting the entire conical main shaft and providing a low-friction spherical bearing, allowing the moving cone to swing freely.

3. Main Frame Pin Bushing: Installed inside the horizontal shaft housing, one at each end. Its main function is to prevent direct contact between the horizontal shaft and the inside of the horizontal shaft housing, providing lubrication (bearing) and protection.

4. Thrust Washer/Bearing: Divided into upper and lower thrust bearings. They work together under the action of a lubricating oil film, enabling the eccentric sleeve assembly to perform smooth eccentric rotational movement.

5. Countershaft Bushing: Installed in the horizontal shaft housing, one at each end. Located between the horizontal shaft and the inner wall of the housing, it provides lubrication and protection, preventing direct contact and wear between the two.

The following is a list of the main copper components suit for Symons, Metso, Sandvik and Spring cone crushers：

Part Number	Description	Type	Brand	442.9659	Ecc. bushing 22,25,28	H2800	SANDVIK
2214 4201	Frame bushing	2'Symons Crusher	SYMONS	442.9686	Ecc.bushing13,16,20,25	S2800	SANDVIK
2206 6641	Mainshaft bushing	2'Symons Crusher	SYMONS	442.6131	Bottom Shell Bushing	S&H2800	SANDVIK
4872 2335	Socket liner	2'Symons Crusher	SYMONS	442.6138	Main shaft step	S&H2800	SANDVIK
2213 5241	Countershaft bushing	2'Symons Crusher	SYMONS	442.6139	Piston Wearing Plate	S&H2800	SANDVIK
	Thrust plate	2'Symons Crusher	SYMONS	442.613	Wearing Plate	S&H2800	SANDVIK
	Underthrust plate	2'Symons Crusher	SYMONS	442.6143	Locating Bar	S&H2800	SANDVIK
2214 5321	Frame bushing	3' Symons Crusher	SYMONS	442.7923	Ecc. bushing 16,19,22	H3000	SANDVIK
2207 0561	Mainshaft bushing	3' Symons Crusher	SYMONS	442.7924	Ecc. bushing 22,25,29	H3000	SANDVIK
4872 3565	Socket liner	3' Symons Crusher	SYMONS	442.7925	Ecc.bushing29,32,34,36	H3000	SANDVIK
2206 0762	Countershaft bushing	3' Symons Crusher	SYMONS	442.8486	Ecc.bushing16,20,25,32	S3000	SANDVIK
5759 7801	Thrust plate	3' Symons Crusher	SYMONS	442.7935	Bottom Shell Bushing	S&H3000	SANDVIK
2207 1401	Mainshaft bushing	3'Shorthead Crusher	SYMONS	442.7895	Main shaft step	S&H3000	SANDVIK
4872 4795	Socket liner	3'Shorthead Crusher	SYMONS	442.7893	Piston Wearing Plate	S&H3000	SANDIVK
2214 5601	Frame bushing	4 ' Symons Crusher	SYMONS	442.7927	Wearing Plate	S&H3000	SANDVIK
2214 4481	Mainshaft bushing	4 ' Symons Crusher	SYMONS	442.7928	Locating Bar	S&H3000	SANDVIK
	Socket liner	4 ' Symons Crusher	SYMONS	442.9406	Ecc.bushing32,36,40,44	H4000	SANDVIK
	Countershaft bushing	4 ' Symons Crusher	SYMONS	442.9642	Ecc. bushing24,28,32	H4000	SANDVIK
5759 9601	Thrust plate	4 ' Symons Crusher	SYMONS	442.9643	Ecc.bushing13,16,20,24	H4000	SANDVIK
2214 5885	Frame bushing	4 1/4' Symons Crusher	SYMONS	442.8067	Ecc.Bushing20,25,30,36	S4000	SANDVIK
2214 3930	Mainshaft bushing	4 1/4' Symons Crusher	SYMONS	442.7146	Bottom Shell Bushing	H4000	SANDVIK
4872 6430	Socket liner	4 1/4' Symons Crusher	SYMONS	442.712	Main shaft step	H4000	SANDVIK
2206 2090	Countershaft bushing	4 1/4' Symons Crusher	SYMONS	442.7122	Piston Wearing Plate	H4000	SANDVIK
5760 2601	Thrust plate	4 1/4' Symons Crusher	SYMONS	442.7107	Wearing Plate	H4000	SANDVIK
2214 6161	Frame bushing	5 1/2' Symons Crusher	SYMONS	442.711	Locating Bar	H4000	SANDVIK
2214 5706	Mainshaft bushing	5 1/2' Symons Crusher	SYMONS	442.8824	Ecc.Bushing18,20,24,28	H6000	SANDVIK
4872 7050	Socket liner	5 1/2' Symons Crusher	SYMONS	442.8825	Ecc.Bushing28,32,36,40	H6000	SANDVIK
2206 5840	Countershaft bushing	5 1/2' Symons Crusher	SYMONS	442.8826	Ecc.Bushing40,44,48,50	H6000	SANDVIK
5760 3501	Thrust plate	5 1/2' Symons Crusher	SYMONS	442.8742	Bottom shell Bushing	S&H6000	SANDVIK
2214 7564	Frame bushing	7' Symons Crusher	SYMONS	442.8732	Mainshaft Step	S&H6000	SANDIVK
2214 6721	Mainshaft bushing	7' Symons Crusher	SYMONS	442.873	Piston Wearing Plate	S&H6000	SANDVIK
4872 8520	Socket liner	7' Symons Crusher	SYMONS	442.8761	Wearing Plate	H6000	SANDVIK
2206 8500	Countershaft bushing	7' Symons Crusher	SYMONS	442.8762	Locating Bar	S&H6000	SANDVIK
5760 7401	Thrust plate	7' Symons Crusher	SYMONS	442.9358	Ecc.Bushing36,40,44,48	H8000	SANDVIK
2214 0636	Bushing	7' Symons Crusher	SYMONS	442.9359	Ecc.Bushing48,52,56,60	H8000	SANDVIK
2207 3501	Frame bushing	36”Rotary disk Crusher	SYMONS	442.936	Ecc.Bushing60,64,68,70	H8000	SANDVIK
2206 3100	Mainshaft bushing	36”Rotary disk Crusher	SYMONS	442.9248	Bottom shell Bushing	H8000	SANDVIK
4872 4100	Socket liner	36”Rotary disk Crusher	SYMONS	442.9723	Mainshaft Step	H8000	SANDVIK
2206 0762	Countershaft bushing	36”Rotary disk Crusher	SYMONS	442.9724	Piston Wearing Plate	H8000	SANDVIK
5760 7801	Thrust plate	36”Rotary disk Crusher	SYMONS	442.9249	Wearing Plate	H8000	SANDVIK
2214 5900	Frame bushing	48” Rotary disk Crusher	SYMONS	442.9308	Locating Bar	H8000	SANDVIK
2207 2400	Mainshaft bushing	48” Rotary disk Crusher	SYMONS	K731.1.0.14	Frame bushing	Φ600 Cone Crusher	SPRING
4872 6702	Socket liner	48” Rotary disk Crusher	SYMONS	K731.1.0.16	Frame bushing	Φ600 Cone Crusher	SPRING
2206 2080	Countershaft bushing	48” Rotary disk Crusher	SYMONS	K731.3.0.03	Mainshaft bushing	Φ600 Cone Crusher	SPRING
5760 2601	Thrust plate	48” Rotary disk Crusher	SYMONS	K731.4.0.06	Socket liner	Φ600 Cone Crusher	SPRING
77015655250	Eccentric bushing	HP100	METSO	K731.2.0.02	Countershaft bushing	Φ600 Cone Crusher	SPRING
	Upper head bushing	HP200	METSO	K731.1.0.09	Circular disk	Φ600 Cone Crusher	SPRING
	Lower head bushing	HP200	METSO	K731.1.0.12	Circular disk	Φ600 Cone Crusher	SPRING
1022072951	Eccentric bushing	HP200	METSO	K731.3.0.04	Circular disk	Φ600 Cone Crusher	SPRING
1022061401	Countershaft bushing	HP200	METSO	K1414.01.01	Frame bushing	Φ900 Cone Crusher	SPRING
104821001	Socket liner	HP200	METSO	K1414.03.03	Mainshaft bushing	Φ900 Cone Crusher	SPRING
	Main frame pin bushing	HP200	METSO	K1414.04.06	Socket liner	Φ900 Cone Crusher	SPRING
1057602103	Thrust Bearing	HP200	METSO	K1414.01.12	Circular disk	Φ900 Cone Crusher	SPRING
77015656200	Upper head bushing	HP300	METSO	K1414.01.09	Circular disk	Φ900 Cone Crusher	SPRING
71022145975	Lower head bushing	HP300	METSO	K1417.1.0.02	Frame bushing	Φ1200 Cone Crusher	SPRING
71022073307	Eccentric bushing	HP300	METSO	K1417.3.0.03	Mainshaft bushing	Φ1200 Cone Crusher	SPRING
70122063300	Countershaft bushing	HP300	METSO	K1417.4.0.01	Socket liner	Φ1200 Cone Crusher	SPRING
77035800600	Socket liner	HP300	METSO	K1417.2.0.03	Countershaft bushing	Φ1200 Cone Crusher	SPRING
71022130525	Main frame pin bushing	HP300	METSO	K1414.1.0.14	Circular disk	Φ1200 Cone Crusher	SPRING
71056612200	Thrust Bearing	HP300	METSO	K1417.1.0.16	Circular disk	Φ1200 Cone Crusher	SPRING
71022147321	Upper head bushing	HP500	METSO	K1420.1.0.04	Frame bushing	Φ1750 Cone Crusher	SPRING
77015655252	Lower head bushing	HP500	METSO	K1420.3.0.03	Mainshaft bushing	Φ1750 Cone Crusher	SPRING
71022074809	Eccentric bushing	HP500	METSO	K1420.4.0.06	Socket liner	Φ1750 Cone Crusher	SPRING
71022065500	Countershaft bushing	HP500	METSO	K1420.2.0.03	Countershaft bushing	Φ1750 Cone Crusher	SPRING
71048723201	Socket liner	HP500	METSO	K1420.1.0.07	Circular disk	Φ1750 Cone Crusher	SPRING
71022139802	Main frame pin bushing	HP500	METSO	K1420.1.0.08	Circular disk	Φ1750 Cone Crusher	SPRING
11057605168	Thrust Bearing	HP500	METSO	K1423.1.0.02	Frame bushing	Φ2200 Cone Crusher	SPRING
11022147711	Upper head bushing	HP800	METSO	K1423.3.0.03	Mainshaft bushing	Φ2200 Cone Crusher	SPRING
11022147723	Lower head bushing	HP800	METSO	K1423.4.0.07	Socket liner	Φ2200 Cone Crusher	SPRING
11022075464	Eccentric bushing	HP800	METSO	K1423.2.0.06	Countershaft bushing	Φ2200 Cone Crusher	SPRING
11022066795	Countershaft bushing	HP800	METSO	K1423.1.0.08	Circular disk	Φ2200 Cone Crusher	SPRING
11048724025	Socket liner	HP800	METSO	K1423.1.0.11	Circular disk	Φ2200 Cone Crusher	SPRING
11022139576	Main frame pin bushing	HP800	METSO	176.01.04	Frame bushing	Old Style Φ900 Crusher	SPRING
11057612405	Thrust Bearing	HP800	METSO	176.03.03	Mainshaft bushing	Old Style Φ900 Crusher	SPRING
171551	Eccentric Bushing	GP100/GP100S	METSO	176.04.02	Socket liner	Old Style Φ900 Crusher	SPRING
171455	Eccentric Bushing	GP100/GP100S	METSO	176.01.09	Circular disk	Old Style Φ900 Crusher	SPRING
171564	Eccentric Bushing	GP100/GP100S	METSO	176.01.12	Circular disk	Old Style Φ900 Crusher	SPRING
285062	Bottom shell Bushing	GP100/GP100S	METSO	183.01.15	Frame bushing	Old Style Φ1200 Crusher	SPRING
285053	Mainshaft Step	GP100/GP100S	METSO	183.03.03	Mainshaft bushing	Old Style Φ1200 Crusher	SPRING
285052	Piston Wearing Plate	GP100/GP100S	METSO	183.04.02	Socket liner	Old Style Φ1200 Crusher	SPRING
285063	Wearing Plate	GP100/GP100S	METSO	183.01.08	Circular disk	Old Style Φ1200 Crusher	SPRING
285064	Locating Bar	GP100/GP100S	METSO	183.01.11	Circular disk	Old Style Φ1200 Crusher	SPRING
942951-A	Frame bushing	GP200/GP200S	METSO	178.01.02	Frame bushing	Old Style Φ1650 Crusher	SPRING
942951-B	Frame bushing	GP200/GP200S	METSO	178.03.03	Mainshaft bushing	Old Style Φ1650 Crusher	SPRING
931714-B	Frame bushing	GP300/GP300S	METSO	178.04.02	Socket liner	Old Style Φ1650 Crusher	SPRING
MM0523930	Bearing	GP300/GP300S	METSO	178.02.05	Countershaft bushing	Old Style Φ1650 Crusher	SPRING
931345	Casting bearing	GP300/GP300S	METSO	178.01.09	Circular disk	Old Style Φ1650 Crusher	SPRING
285344	Frame bushing	G11	METSO	178.01.12	Circular disk	Old Style Φ1650 Crusher	SPRING
203109	Frame bushing	G11	METSO	181.01.02	Frame bushing	Old Style Φ2100 Crusher	SPRING
MM0315148	Bearing Bushing	G11	METSO	181.03.02	Mainshaft bushing	Old Style Φ2100 Crusher	SPRING
442.8143	Ecc. Bushing29,25	36″	METSO	181.04.02	Socket liner	Old Style Φ2100 Crusher	SPRING
442.8144	Ecc.Bushing22,19,16	36″	METSO	181.02.06	Countershaft bushing	Old Style Φ2100 Crusher	SPRING
442.9657	Ecc. bushing 13,16,18	H2800	SANDVIK	181.01.11	Circular disk	Old Style Φ2100 Crusher	SPRING
442.9658	Ecc. bushing 18,20,22	H2800	SANDVIK	181.01.13	Circular disk	Old Style Φ2100 Crusher	SPRING

If you need, you can watch the video below which shows copper components related to this topic.

All names, marks, models, symbols and descriptions are used for reference purposes only and it is not impied that any of the parts/brands listed are the product of any company other than ONA. We are not agents or distributors for any of the above mentioned brands nor do we have any commercial relationship or association with them.

#Metso Mantle #Symons 5.5 Cone Crusher #Sandvik Cone Crusher CH440 #Metso GP11f Cone Crusher #Spring Cone Crusher #Sandvik CS430 Cone Crusher

What's the Metso Barmac 840 STD/DTR Rotor?

2026-02-04

Metso's Barmac 840 rotor is the most wear parts of the Barmac B7150se VSI crusher, commonly used in quarries and stone production plants. "840" refers to the rotor's outer diameter, or 840 mm.

Function

The rotor's primary function is to accelerate the feed material and fling it against a fixed material bed ("rock-on-rock" anvils) or a surrounding feed bed. This high-speed impact crushes the rock along its natural fissures, producing high-quality cubic aggregate.

1. Material Acceleration: The raw material enters the crusher through the feed pipe and reaches the center of the rotating rotor.

2. Distribution and Ejection: The rotor's tip captures the material and ejects it outward at high speed through the rotor outlet.

3. Crushing Impact: The ejected material impacts the dense material layer accumulated on the surrounding feed ring and cascade rings, causing the material to break.

The "rotor" isn't a single component; it's a rotor assembly consisting of a rotor body and wear parts for Barmac B7150se vsi. Key components of the Barmac 840 rotor include:

Rotor body: The primary cast iron or steel structure that supports all other components. It serves as the backbone of the entire assembly.

Rotor tip (wear parts): These are replaceable tungsten carbide components bolted to the rotor body. They are the primary wear parts that directly contact and propel the feed material. They require periodic replacement.

Rotor outlet: The open passage between the rotor tips through which the accelerated material exits the rotor.

Shaft and bearings: The rotor assembly is mounted on a heavy shaft supported by large bearings for Metso Barmac B7150se vsi, enabling high-speed rotation (typically around 1,500-2,000 RPM).

When do wear parts need to be replaced?

Decreased output/capacity: The crusher is not processing as much material as before.

Poor product shape: An increase in flaky or elongated particles.

Excessive vibration: This may be due to uneven wear on the rotor tip tips, leading to imbalance.

Increased operating noise

The following is a list of the main components of the Barmac 840 DTR and STD:

840 DTR
№	Part Number	Description	Qty	Weight. KG Unit
1	B90334105N	Bare Rotor	1	370
2	B96394049O	Rotor Tip Set	3	5.2
3	B90394060A	Short Backup Tip Set	1	1.6
4	B90394055B	Trial Plate	1	1.5
5	B96394060B	Long Backup Tip Set	1	3.2
6	B96334170C	Top wear plate lipped	1	55
7	B96334180A	Bottom wear plate lipped	1	58
8	B96394150O/B	Bolt Set	3	0.15
9	B963940425A	Bolt	1	0.2
10	B96394150N	Cavity Wear Plate Outer	4	7.5
11	B96394150O	Cavity Wear Plate Middle	2	7.5
12	B96334030E	Feed Eye Ring	1	21
13	B96334135A	Upper Wear Plate	1	19
14	B96334140A	Lower Wear Plate	1	25.2
15	B962S7040B	Feed Tube	1	14
16	B96394120E	Distributor Plate	1	33
840 STD
№	Part Number	Description	Qty	Weight. KG Unit
1	B96334105L	Bare Rotor	1	253
2	B96394049O	Rotor Tip Set	2	5.2
3	B96394055B	Trial plate set	1	3.5
4	B96394060B	Long Backup Tip Set	1	3.2
5	B96334170C	Top wear plate lipped	1	55
6	B96334180A	Bottom wear plate lipped	1	58
7	B96394150O/B	Bolt Set	3	0.15
8	B963940425A	Bolt	1	0.2
9	B96394150N	Cavity Wear Plate Outer	4	2.5
10	B96334135A	Upper Wear Plate	1	19
11	B96334140A	Lower Wear Plate	1	25.2
12	B96334030E	Feed Eye Ring	1	21
13	B962S7040B	Feed Tube	1	14
14	B96394120E	Distributor Plate	1	33

If you have any needs, you can contact us at any time.

All names, marks, models, symbols and descriptions are used for reference purposes only and it is not implied that any of the parts/brands listed are the product of any company other than ONA. We are not agents or distributors for any of the above mentioned brands nor do we have any commercial relationship or association with them.

#metso barmac 7150 #barmac 7150 #barmac b series #barmac b6150se #barmac b9100se #barmac b6150

What's the part number of CH870/H7800?

2026-02-04

CH870/H7800 refer to the cone crusher model by Sandvik.

Therefore, there is not a single "part number" for the entire crusher. Instead, there are thousands of part numbers for its individual components.

Mantle Crusher
Crusher Concave
Spider Bushing
Inner Head Nut with Buring Ring

Here are some examples of critical parts for the CH870/H7800 crusher:

BOTTOMSHELL ASSEMBLY	452.0697-001	SUPPORT RING	452.0687-001
WEARING PLATES, BOTTOMSHELL	452.1191	DOWEL PIN	442.8290-01
DUST COLLAR ASSEMBLY	452.0998-901	WEARING PLATE	452.0710-901
ECCENTRIC ASSEMBLY	452.0809-901	WASHER TRBSB 17X42	847.0060-00
HYDROSET CYLINDER ASSEMBLY	452.0953-901	FEED HOPPER, LOWER	452.0799-901
PINION SHAFT HOUSING ASSEMBLY	452.0656-901	FEED HOPPER, UPPER	452.0802-901
MAIN SHAFT ASSEMBLY	452.0917-901	CONE EC	452.1451-901
TOP SHELL ASSEMBLY	452.0684-901	WEARING RUBBER	452.1370-901
FEED HOPPER	452.0760-901	LOCK NUT M16 8 FZB ISO 7040	845.0215-00
HYDROSET SYSTEM	452.1488-901	SPLITTER	452.1741-901
HOSES AND PROTECTIONS AT CRUSHER	452.1158-901	COVER	452.1455-901
DIRECT DRIVE ON SUB-FRAME	452.1157	RUBBER SHEET	452.1753-901
V-BELT DRIVE ON SUB-FRAME	452.0946	WEARING RUBBER	452.1296-001
V-BELT DRIVE, FIXED	452.1881	RUBBER ATTACHMENT STRIP	452.1303-001
TOOL LIST	452.1257	CONE EC	452.0792-901
OVERPRESSURE INSTALLATION	452.1084	RUBBER SHEET EC	452.1137-001
BOTTOM SHELL	452.0675-001	RUBBER PLUG	873.1287-00
FOOT BASE	452.1064-001	ADJUSTING UNIT	452.1431-901
FOOT FOR SUBFRAME BASE	452.0977-001	SCREW M6S 20X65 8.8 FZB ISO 4017	840.0650-00
FOOT FOR SUBFRAME, MIRROR - INVERTED BASE	452.0977-002	WASHER TBRSB 21X58	847.0197-00
SCREW M6S 30X110 8.8 FZV ISO 4014	840.0693-00	LOCK NUT M20 8 FZB ISO 7040	845.0203-00
WASHER BRB 31X58 HB200	847.0125-00	SCREW M6S 24X130 8.8 FZB 1SO 4017	840.1192-00
BOSS	442.7907-01	DISTRIBUTION BOX	452.1443-901
COVER	442.7201-00	SCREW M6S 20X35 8.8 FZB LS0 4017	840.1135-00
STUD WELD	843.1578-00	WEARING PLATE	452.1447-001
WASHER BRB13X24 FZB HB200 IS0 7089	847.0147-00	RUBBER SHEET	442.9747-01
LOCK NUT M12 8 FZB ISO 7040	845.0030-00	RUBBER SHEET	442.9751-01
LINER-PIN SHAFT ARM	452.1066-901	RUBBER SHEET	442.9751-02
LINER-NARROW ARM	452.1065-901	RUBBER SHEET	442.9750-01
BNED	442.9396-00	SCREW M6S 16X65 8.8 FZB ISO 4014	840.0071-00
FLANGE	900.2199-00	MAIN VALVE	902.0850-00
SCREW M6S 16X50 8.8 FZB ISO 4017	840.0068-00	PIPLT VALVE BLOCK	902.0851-00
WASHER BRB17X30HB200 FZB 1S07089	847.0016-00	VALVE BLOCK	452.0978-001
O-RING	873.0129-00	REDUCING THREADED ADAPTER	900.2291-00
BOTTOM SHELL BUSHING	452.0795-001	MEASURING NIPPLE 1/4“	900.2292-00
PIN CP 12M6X30 1S0 2338	853.0464-00	ADAPTER G 3/3” BXG ½” B	900.0647-00
SWIVEL RUN TEE G 3/4	900.2127-00	SEAL TREDO 18	873.0384-00
COVER 3/4	900.0276-00	RETURN OIL HOSE	452.1616-901
SEAL RING TREDO 20 3/4	873.0385-00	HYDRAULIC HOSE	452.1286-001
WEARING PLATES, BOTTOMSHELL	452.1191-901	HYDRAULIC HOSE	452.1287-001
ECCENTRIC WEARING PLATE	452.0808-001	HYDRAULIC HOSE	452.1288-001
PIN	853.0646-00	ADAPTER	900.2599-00
WEARING PLATE	452.1077-001	STRAIGHT ADAPTER	900.0659-00
WEARING PLATE	452.1078-001	HYDRAULIC HOSE SAE 100 R2AT 2”X2000	452.1538-001
WEARING PLATE	452.1078-002	BRACKET	452.1414-001
ROUND BAR 1312-00 D 20 L=100	803.0625-00	RUBBER CLOTH	452.1415-001
PLATE HB 360-440 T=6 L=480	800.0518-00	WEARING LINER	452.1419-901
DUST COLLAR	452.0926-001	BOLT	442.9503-01
SCREW M6S 16X30 8.8 FZB 1S0 4017	840.0064-00	SUPPORT	452.1425-901
RING	452.0999-001	BRACKET	452.1426-001
SCREW M6S 16X60 8.8 FZB 1S0 4017	840.0070-00	BRACKET	452.1448-001
WASHER BRB 17X30 HB200 IS07089	547.0016-00	BRACKET	452.1449-001
LOCATING BAR	452.0834-001	BRACKET	452.1468-901
SHIM T=0,1	452.1279-001	PROTECTION	452.1427-001
SHIM T=0,5	452.1279-002	BRACKET	452.1476-901
SHIM T=0,7	452.1279-003	SCREW M6S 12X60 8.8 FZB ISO 4014	840.0051-00
SHIM T=1	452.1279-004	SCREW M6S 12X50 8.8 FZB ISO 4014	840.0049-00
SCREW MC6S 10X40 8.8 FZB	841.0254-00	HOSE SAE 100 R2AT 1”1200	452.1579-001
GASKET	452.1267-001	SEAL RING TREDO 30	873.0390-00
INNER DUST SEAL RING	452.1000-001	FLANGE HALFSAE 3000 2”PSI	900.2592-00
ECCENTRIC	452.0540-001	O RING	873.0755-00
ECCENTRIC BUSHING 32+37+42+47	452.0805-001	SCREW MC6S 12X35 8.8 FZB	841.0268-00
ECCENTRIC BUSHING 47+52+57+62	452.0806-001	HOSE SAE 100 RIAT 3/4”X1000	452.1580-001
ECCENTRIC BUSHING 62+68+74+80	452.0807-001	HOSE SAE100 RIAT 1”X1000	452.1587-001
HUB	452.0516-001	PILOT VALVE PROTECTION	452.1511-001
RING	452.0902-901	SCREW M6S 16X40 8.8 FZB ISO 4017	840.0066-00
SCREW M6S 16X50 8.8 FZB 1S0 4017	840.0069-00	SCREW M6S 12X20 8.8 FZB ISO 4017	840.0622-00
WASHER BRB 17X30 HB200 FZB ISO 7089	847.1106-00	STRAIGHT HOSE COUPLING	452.1536-901
KEY	442.9610-01	SCREW MF6S 16X35 8.8	841.0578-00
SCREW MC6S 16X90 12.9	841.0535-00	BRACKET	452.1414-002
SCREW MC6S 16X55 12.9	841.0548-00	HOSE	819.0061-00
WASHER B16 17X30	847.0181-00	O RING	873.0615-00
GEAR AND PINION SET 50HZ	452.0530-901	END COVER 2” SAE-FLANGE	452.1589-001
GEAR AND PINION SET 60HZ	452.0531-901	END COVER 3/4” SAE-FLANGE	452.1592-001
KEY	452.1063-001	FLANGE HALF SAE 3000 3/4"	900.2602-00
HYDROSET CYLINDER	452.0970-001	FLANGE HALF SAE 3000 1”	900.2385-00
SCREW M6S 30X200 10.9	840.1176-00	O RING	873.1299-00
WASHER BRB 31X56 HB305 1S0 7089	847.0310-00	END COVER L”SAE-FLANGE	452.1591-001
HYDROSET CYLINDER BUSHING	452.0969-001	END COVER 4” SAE-FLANGE	452.1590-001
SCREW M6S 10X16 8.8 FZB ISO 4017	540.0032-00	SCREW MC6S 10X35 8.8 FZB	841.0253-00
WASHER BRB 10,5X22 HB200	847.0144-00	LOCK NUT M10 8 FZB SO 7040	845.0213-00
O-RING 740X8,4	873.1247-00	BRACKET FOR VALVE	452.1602-901
PISTON ASSEMBLY	452.1049-901	SPACER	452.1665-001
PIN CP 25M6X60	853.0119-00	SUBFRAME DIRECT DRIVE	452.0905-901
PISTON WEARING PLATE	452.0538-001	DUST SEAL	452.1642-901
STEP WASHER	452.0537-001	PROTECTIVE CAP FOR SHAFT	452.1014-901
CHEVRON PACKING	452.0986-901	SHAFT COUPLING OMEGA E120	930.0313-00
PACKING CLAMP PLATE	452.0990-001	RUBBER DAMPER	442.9650-92
SCREW MC6S 12X30 8.8 FZB	841.0267-00	SPACER WITH FLAT BAR	452.1622-901
HYDROSET CYLINDER COVER	452.0972-001	SUPPORT	458.0452-01
PROTECTION PLUG	919.0190-00	WASHER	442.9342-01
PLUG VSTI R ½”-ED	900.2307-00	SENSOR	984.0217-00
SCREW MC6S 8X40 8.8 FZB	841.0239-00	SHIM T=1	458.0406-01
AIR BLEEDER VALVE	902.0605-00	SHIM T=0,5	458.0406-02
0-RING 629,3X5,7	873.1352-00	SHIM T=0,3	458.0406-03
O-RING 685X5,7	873.1351-00	THREADED PIN M30X130 MACHINED	452.1609-001
PISTON SENSOR	984.0421-00	SCREW M6S 36X180 8.8 FZV ISO 4014	840.0718-00
0-RING 44,2X3	873.0111-00	NUT M6M M30 8 FZV ISO 4032	845.0013-00
PINION SHAFT HOUSING	452.0657-001	WASHER BRB 8.4X16 HB200 ISO 7089	847.0012-00
SCREW M6S 24X100 8.8 FZV ISO 4014	840.0672-00	SCREW M6S 8X20 8.8 FZB ISO 4017	840.0021-00
WASHER TBRSB 26X65	847.0063-00	SCREW M6S 20X50 8.8 FZB ISO 4017	840.0077-00
GASKET T=0,5	442.9364-01	SUBFRAME V-BELT DRIVE	452.1263-901
GASKET T=0,5	442.9364-02	MOTORFRAME FOR V-BELT DRIVE	452.1004-901
GASKET T=0,5	442.9364-03	SLIDE RAIL	458.0773-01
BEARING 32230 J2	868.0832-00	BRACKET	458.0156-00
NUT KM 30 150X2S02982	845.0164-00	COUPLING RB 2,15 D-110/120	930.0262-00
LOCK WASHER MB 30 ISO 2982	847.0299-00	SPACER	458.0307-01
WEAR RING	442.9809-01	SHAFT	458.0348-01
SPACER RING	442.9808-01	BEARING HOUSING	458.0349-01
O RING	873.0136-00	KEY T 28X16X110	857.0336-00
OIL SEAL RING TYPE 4	873.1219-00	SCREW SK622 16X40	842.0019-00
BEARING COVER, INNER	452.0716-001	ROLLER BEARING 23024	868.0829-00
BEARING COVER, OUTER	442.9260-01	CLAMPING SLEEVE H3024	868.0830-00
SCREW M6S 12X35 8.8 FZB ISO 4017	840.0046-00	SUPPORT BLOCK	649.0168-01
SCREW M6S 20X60 8.8 FZB ISO 4017	840.0078-00	GUIDE RING	871.0110-00
WASHER BRB 21X36 HB200	847.0132-00	FELT SEAL FS 460	873.1289-00
GASKET T=0,8	442.9365-01	V-RING V-110A	873.0898-00
GASKET T=0,8	442.9366-02	COVER END	871.0404-00
SPRING PIN	853.0590-00	SPACER	442.9343-01
PINION SHAFT	452.0727-001	DRIVING	452.1846-901
PLUG	900.2388-00	V-BELT GUARD, SHAFT	452.1297-901
KEY	857.0360-00	V-BELT GUARD, ASSY	452.0769-901
KEY	857.0354-00	WASHER BRB 37X66 HB200 SO 7089	847.0162-00
ELBOW 3/4 IS0 49	900.0022-00	SCREW M6S 36X130 8.8 FZV ISO 4017	840.1038-00
SCREW	842.0020-00	SCREW M6S 27X70 8.8 FZV ISO 4017	840.0669.00
ADAPTER ¾”	900.0655-00	NUT M6M M12 8 FZB ISO 4032	845.0007-00
OIL LEVEL GAUGE	442.9346-01	NUT M6M M36 8 FZV ISO 4032	845.0221-00
SEAL RING TREDO 26	873.0387-00	NUT M6M M36 8 FZV ISO 4032	840.0048-00
ADAPTER G 1 B	900.0656-00	SCREW M6S 24X150 8.8 FZV ISO 4014	840.0677-00
SEAL RING TREDO 23	873.0386-00	LOCK NUT M24 8 FZB	845.0216-00
RETAINING RING	855.0134-00	V-BELT PULLEY 710 MGT 160 16XSPC	879.0588-00
SCREW M6S 16X120H	840.1063-00	V-BELT PULLEY 710 MGT 160 14X8V	879.0577-00
NUT M6M M16 8 FZB ISO 4032	845.0009-00	BUSHING	452.1884-901
MAINSHAFT & HEAD CENTRE	452.1930-301	SUPPORT BLOCK	649.0168-04
MAIN SHAFT SLEEVE	452.0505-001	ADAPTER FIXED 7’	452.1848-901
MAIN SHAFT STEP	452.0507-001	KEY R 28X16X140	857.0290-00
RETAINING RING SGA 100	855.0026-00	NUT M6M M24 8 ISO 4032	845.0012-00
MANTLE A	452.0837-001	WASHER TBRB 40X68	847.0122-00
MANTLE EF	452.0845-001	LIFTING TOOL	452.1247-901
HEAD NUT WITH BURNING RING	452.0936-901	LIFTING TOOL	452.1246-901
INNER HEAD NUT	452.0930-001	LIFTING TOOL	442.9446-00
BURNING RING	452.0938-001	LIFTING TOOL	452.0452-001
DUST SEAL RING	452.0924-001	PISTON STOP PLATE	452.1512-901
RETAINING RING	452.0921-001	SCREW M6S 30X100	840.0692-00
RETAINER	442.9367-01	LOWERING ROD M16X900	442.7284-90
SCRAPER	452.1264-001	LOWERING ROD M30X1000	843.1529-00
SCREW M6S 16X70 8.8 FZB ISO 4014	840.0072-00	EYE BOLT LT M80	899.0336-00
TOP SHELL	452.0664-00	EYE BOLT LT M30	899.0032-00
SCREW M6S 42X280 8.8 1S0 4014	840.1124-00	EYE BOLT LT M24	899.0031-00
NUT M6M M42 8 FZB ISO 4032	845.0322-00	EYE BOLT LT M20	899.0160-00
WASHER BRB 43X80 HB200 SS3576	847.0171-00	EYE BOLT LT M16	899.0147-00
WASHER HB 200	442.9979-01	EYE BOLT LT M12	899.0155-00
PROTECTIVE CAP	899.0278-00	EYE BOLT LT M10	899.0099-00
SCREW M6S 42X120 8.8 FZB	442.9530-03	EYE BOLT LT M80	899.0244-00
SCREW M6S 16X25 8.8 FZB 1S04017	840.0634-00	RING SPANNER STRIKING 65MM	920.0110-00
ARM SHIELD	452.1060-001	RING SPANNER STRIKING 55MM	920.0109-00
LUBRICATION NIPPLE R1/4	914.0093-00	RING SPANNER STRIKING 46MM	920.0238-00
PIPE BUSHING 3/4X1/4 ISO 49	900.0139-00	U-RING SPANNER 55 MM	920.0243-00
STEEL PIPE	808.0095-00	U-RING SPANNER 46 MM	920.0131-00
COMPRESSION FITTINGS	900.0435-00	U-RING SPANNER 36 MM	920.0135-00
PLUG	900.1132-00	U-RING SPANNER 30 MM	920.0134-00
SPIDER CAP	452.0553-001	U-RING SPANNER 24 MM	920.0022-00
AIR FILTER	912.0114-00	U-RING SPANNER 18 MM	920.0244-00
NIPPLE	900.0169-00	U-RING SPANNER 16 MM	920.0245-00
ELBOW	900.0002-00	U-RING SPANNER 19 MM	920.0042-00
STEEL PIPE	808.0220-00	U-RING SPANNER 14 MM	920.0040-00
COMPRESSION FITTINGS	900.0425-00	U-RING SPANNER 10 MM	920.0038-00
O RING	873.1210-00	U-RING SPANNER 8 MM	920.0037-00
SCREW M6S 20X100 8.8 FZB ISO 4014	840.0653-00	SOCKET SCREW KCY 5	920.0035-00
SPIDER BUSHING	452.1619-001	SOCKET SCREW KEY 5/8"	920.0032-00
TEMPERATURE SENSOR	191.2376-00	CHUNK OF LEAD	442.0800-91
CONNECTION BOX	191.2365-00	FCELER GAUGE 0,05-1 MM	923.0422-00
ELBOW 1/4 ISO 49	900.0075-00	OVER PRESSURE AGGR.	452.1168
SCREWM6S 20X90 8.8 FZB 1S0 4017	840.0652-00	BUSHING 1 1/2 X 3/4 ISO 49 N4	900.0154-00
SEAL RING	452.1599-001	HOSE COUPLING R 3/4	900.1424-00
RING	452.0550-001	HOSE 1”	819.0187-00
RETAINING RING	452.0549-001	SOCKET RP 3/4	900.0275-00
SCREW MC6S 6X45 8.8 FZB	841.0225-00	T-PIPE PLASTIC ¾	900.2572-00
PLUG	900.0981-00	HOSE CLIP 28 SMS 2298 DY 23-27 MM	900.1358-00
CONCAVE EC	452.0838-001	OVER PRESSURE AGGR. 200 V 50 HZ	452.1168-50/200
CONCAVE EF	452.0840-001	OVER PRESSURE AGGR. 400 V 50 HZ, 460V 60HZ	452.1168-50/400
CONCAVE F	452.0841-001	OVER PRESSURE AGGR. 525 V 50 HZ	452.1168-50/525
CONCAVE MF	452.0842-001	OVCR PRESSURE AGGR. 550 V 50 HZ	452.1168-50/550
CONCAVE M	452.1754-001	OVER PRESSURE FAN	442.9325-00
SEALING COMPOUND	873.1112-00	AIR FILTER FK 200	912.0219-00
FILLER RING EC	452.0891-901	MOTOR IEC 71-2 0.37KW IM3011 200V 50HZ	972.0845-00
FILLER RING EF, F, MF	452.0898-901	MOTOR IEC 71-2 0.37/0.43KW IM3011 400V 50HZ.460V,60HZ	972.0838-00
SCREW N6S 24X110 8.8 FZV ISO 4014	840.0673-00	MOTOR IEC 71-2 0.37KW IM3011 525V 50HZ	972.0843-00
THREAD TRAY M24X3X1,5D	899.0293-00	MOTOR IEC 71-2 0.37KW IM3011 550V 50HZ	972.0842-00
WASHER BRB 25X45 HB200	847.0124-00	LOCK NUT M36 8 FZB	845.0273-00
SCREW M6S 24X80 8.8 FZV ISO 4017	840.0670-00	SLEEVE	442.9353-01
WEARING PLATE	452.1369-901	WASHER	442.9354-01
SCREW M6S 36X540 8.8	840.1136-00	DISC SPRING	863.0015-00

#sandvik ch870 #sandvik cone crusher for sale #customized sandvik cone crusher parts #fob price for sandvik crusher parts sandvik crusher wear parts #sandvik mantle #sandvik hydrocone

What's the parts in Sandvik CV229 Rotor Assembly?

2026-02-04

Sand making machines are generally only used in stone mines and stone factories. Rotor assembly is the complete spinning-rotor assembly that fits inside VSI (Vertical Shaft Impact) crusher.

Which mian parts in the Sandvik cv229 rotor assembly?

A high-strength welded plate hub that carries the tungsten-carbide-tipped wear parts (rotor tips, back up tip sets, trial plate etc.) and accelerates the feed rock to high speed so the particles shatter against the anvils and produce cubical sand or aggregates.

Other components（feed tube, feed eye ring, distributor plate, cavity wear plate, upper/lower wear plate）are made of high chromium alloy Cr26Mo0.5. Top/bottom wear plate are made of high-strength wear-resistant plate.

What's the using life for each part?

In general:

Rotor tip/cavity wear plate: Around 5/7/10 days

Others: About 1 month

Below is the anatomy diagram of CV229:

Pos No.	Qty	PN	Description
1	1	488.0219-901	High profile rotor body
2	1	488.0029-001	Taper lock
3	1	488.0361-901	Lower wear plate set
4	1	488.0360-901	Upper wear plate set
5	1	488.0076-001	Distributor plate
6	1	488.1513-901	Distributor locating pin set
7	1	488.1644-901	Cavity wear plate set Turbo (upper)
8	1	488.1703-901	Cavity wear plate set Turbo (middle)
9	1	488.1704-901	Cavity wear plate set Turbo (lower)
10	1	488.0362-901	Trail plate 330 set
11	3	488.1456-901	Turbo tip set 110 mm (hard)
12	1	488.0368-901	Backup tip set
13	1	488.0369-901	Top wear plate set
14	8	840.0077-00	Screw M6S 20x50 8.8 ISO 4017
15	1	841.0502-00	Screw MC6S 24x60 12.9
16	1	488.0841-001	Top plate

What's the penetrant testing in crusher wear parts?

2026-02-04

Penetrant testing, also known as liquid penetrant testing, is a non-destructive testing method widely used in industrial fields such as casting and forging. Its main function is to detect surface defects in mantle and concave, and other wear liners.

Its core principle is very simple and intuitive: it utilizes the capillary action of liquids to detect discontinuous defects with openings on the material surface, such as cracks, pores, and porosity.

Here is a penetrant test report from ONA Casting, for CH660 cone crusher wear parts cone crusher concave liner 442.9356.

442.9356

Basic Principles and Process

The penetrant testing process is similar to blotting away spilled liquid with a paper towel. The basic steps are as follows:

1. Cleaning: Thoroughly clean the surface of the bowl liner and mantle to be tested, removing any oil, iron filings, paint, etc., ensuring that defect pathways are open.

2. Applying the penetrant: Spray or brush a special liquid (penetrant) containing colored or fluorescent dye onto the working surface and allow sufficient "residence time" (usually a few minutes to tens of minutes). During this time, the penetrant will penetrate into even the smallest surface opening defects through capillary action.

3. Removing excess penetrant: After the residence time, carefully wipe or rinse off any excess penetrant from the working surface. The key point is that the penetrant trapped inside the defect will not be washed away.

4. Applying the developer: Apply a thin layer of developer to the working surface. It is usually a white powder suspension or dry powder, acting like blotting paper, using capillary action to "draw back" the penetrant from the defect to the surface.

5. Observation: After sufficient development time, observe the surface.

Staining method: Under sufficient white light, the defect will show a clear red (or other colored) mark.

Fluorescence method: Under ultraviolet light (black light), the defect will emit a bright yellow-green fluorescence.

Main advantages

High sensitivity: Capable of detecting extremely fine, invisible surface opening defects.

Wide application: Applicable to almost any non-porous material (metals, ceramics, plastics, etc.).

Simple operation: Relatively low equipment cost, simple and intuitive operation process.

Intuitive results: Detection results are directly displayed on the workpiece surface, easy to observe and interpret.

Portable: Can be used for on-site inspection of large equipment or components.

#concave cone crusher #concave crusher #gyratory crusher mantle #bowl and mantle crusher #cone crusher bowl and mantle #cone crusher mantle liner

What's the production process of crusher wear parts?

2026-02-04

The production process for crusher wear parts (like cone crusher jaw plates, metso cone crusher parts mantles, metso cone liners, hammers, etc.) is a precise and multi-stage operation designed to create parts that are extremely wear-resistant and tough.

Here is a detailed breakdown of the typical production process:

Step 1: Pattern/Mold Making

· Process: A physical model (pattern) of the part is created, typically from wood.

· Purpose: This pattern or mold defines the exact shape and dimensions of the final cast part. Its accuracy is critical.

Step 2: Molding and Casting

1. Mold Creation: Sand molds are commonly used. The pattern is packed in special foundry sand mixed with a binder (like clay or resin) to create a firm mold cavity in the shape of the part. The mold is typically made in two halves (cope and drag).

2. Melting: Raw materials (scrap steel, pig iron, and specific alloys like chromium, molybdenum, and manganese) are melted in a large furnace (e.g., electric arc furnace or induction furnace) at temperatures exceeding 1500°C (2732°F).

3. Pouring: The molten metal is poured into the prepared mold cavity and left to solidify.

Step 3: Shakeout and Cleaning

· Shakeout: Once the casting has cooled and solidified, the sand mold is broken apart, and the raw casting (called a "casting with gates and risers") is removed.

· Cleaning: The casting is then cleaned to remove all residual sand and the excess metal from the pouring channels (gates) and feeders (risers). This is often done using shot blasting (propelling small metal beads at high velocity) or arc air gouging.

Step 4: Heat Treatment

This is a crucial step that determines the final mechanical properties of the part, such as hardness, strength, and toughness.

· Process: The casting is subjected to a carefully controlled sequence of heating and cooling.

· Typical Cycle:

· Quenching: The part is heated to a very high temperature and then rapidly cooled (quenched) in oil or air. This creates a very hard, but brittle, microstructure.

· Tempering: The quenched part is reheated to a lower temperature and held for a specific time before cooling. This reduces brittleness and relieves internal stresses, achieving the perfect balance of hardness and toughness required to withstand impact and abrasion in a crusher.

Step 5: Machining and Finishing

· Process: The heat-treated casting is machined to achieve precise final dimensions and tolerances. This is typically done on CNC (Computer Numerical Control) machines like lathes, milling machines, and drills.

· Purpose: To ensure the part fits perfectly into the crusher. Key contact surfaces, bolt holes, and mating features are machined to exact specifications.

Step 6: Quality Control and Inspection

Quality checks are performed throughout the entire process.

· Chemical Analysis: A sample of the molten metal is analyzed via spectrometry to ensure the alloy composition is correct.

· Dimensional Inspection: Finished parts are measured with calipers, micrometers, and CMMs (Coordinate Measuring Machines) to verify they match the engineering drawings.

· Hardness Testing: The surface hardness is checked at multiple points using a Brinell or Rockwell hardness tester to ensure it meets the required standard.

· Non-Destructive Testing (NDT): Methods like Magnetic Particle Inspection (MPI) or Dye Penetrant Inspection (DPI) are used to detect surface or sub-surface defects like cracks or inclusions that are not visible to the naked eye.

Step 7: Painting and Marking

· The finished part is often painted with a rust-preventative primer for protection during storage and shipping. We can customized color as your needs.

· Important information (part number, heat number, brand) is stamped or painted on the part for identification.

Step 8: Packaging and Shipping

The parts are securely packaged, usually in wooden pallet or iron pallet, to prevent damage during transportation to the customer.

Summary of Key Materials Used:

The specific material chosen depends on the application (e.g., crushing granite vs. recycling concrete).

· High Manganese Steel (Mn14, Mn18, Mn22): The classic material that work-hardens under impact, becoming harder as it is used.

· High Chromium Steel (Cr26): Excellent abrasion resistance but lower impact toughness. Used for highly abrasive conditions with less impact.

· Alloy Steel: A combination of various elements (like Cr, Mo, Ni) to create a balance of properties for specific crushing challenges.

#metso jaw crusher parts #jaw crusher plates #jaw crusher parts #cone crusher liners #cone crusher mantle #metso cone crusher hp 300

What's the VTM (Vertical Tower Mills) Liner?

2026-02-04

VTM Liners: Protect Your Vertical Grinding Mill's Core

In ONA Casting, we not only provide wear parts for crusher, but also produce many high chrome products. VTM (Vertical Tower Mills) Liners which suit to Metso mining equipment are critical wear-resistant components installed inside the vertical grinding mill. Their primary function is to protect the mill's inner shell from severe abrasion and impact caused by the grinding media and ore.

mining wear parts

Key Features & Benefits:

Superior Wear Resistance: Manufactured from advanced high-chromium cast iron, they withstand continuous abrasion, significantly extending service life.

Optimized Grinding Efficiency: The liner profile is designed to enhance the grinding media motion, leading to better material processing and particle size distribution.

Reduced Operating Costs: Durable liners decrease the frequency of shutdowns for maintenance, maximizing your mill's uptime and productivity.

Precision Engineering: Ensures a perfect fit for easy installation and stable performance within the mill chamber.

Inspection: Chemistry, Hardness, Magnetic Particle Examination, Dimension inspection report.

metso equipment

At ONA Casting, we produce VTM liners with precise dimensions and optimal metallurgy to ensure they deliver maximum protection and value for your grinding operations. We also produce cast iron plate blow bar for impact crusher wear part, casting concave mantle for cone crusher spare wear parts, concrete mixer parts, etc.

#cheap manganese cone crusher parts price #china impact crusher parts price #china impact crusher parts suppliers #china impact crusher wear parts #crusher wear parts concave bowl liner in kyrgyzstan #extec cone crusher wear parts

What's the Trio Cone Crusher Parts?

2026-02-04

ONA Casting manufacture compoments suit to Trio crusher parts as follows:

1. Wear Parts

These are the parts that directly interact with the rock and undergo constant abrasion and impact. They determine the crusher's product size, capacity, and are crucial for maintaining efficiency.

Mantle (Get China cone crusher parts mantle price): The moving cone-shaped part that gyrates against the concave to crush rock. It's the primary wear surface.

Concave (or Bowl Liner): The stationary outer surface that the mantle crushes the rock against. Mantles and concaves are always replaced as a matched set to ensure optimal crushing performance and product shape.

Feed Plate (Get high manganese crusher parts quotes): Mounted at the top of the crusher, the function is distribute incoming feed material evenly around the crushing chamber. This prevents uneven wear and maximizes crusher efficiency and liner life.

Crushing Chamber for (casting concave mantle for cone crusher spare wear parts)

: This refers to the *combination* of the mantle and concave, and their specific profile (e.g., coarse, medium, fine). According to the chamber of concave, we can find the correct mantle for you.

There also has spare parts, know more as follows parts list:

No	Part Number	Description
1	14/12G-AHPP - OD	14/12G-AHPP OUTLINE DRAWING
2	14/12G-AHPP - OD	14/12G-AHPP OUTLINE DRAWING
3	A482242	GENERAL ARRANGEMENT FOR 75NPCWBH ZVH1 DRIVE
4	A482293	ARRANGEMENT OF 100 DD-HRM WITH 110KW MOTOR
5	A482654	8/6 E-AH WITH 45kW MOTOR ZV1 LEVERLINK GENERAL ARRANGEMENT
6	A482905	DRIVEGUARD
7	A482907	COU ING GUARD
8	A482907	COU ING GUARD
9	A482947	DRIVEGUARD
10	A482948	DRIVEGUARD
11	A482950	DRIVEGUARD
12	A403686	COMPONENTS DIAGRAM
13	A483218	COU ING GUARD
14	A483311	DRIVEGUARD
15	A591803	ARRANGEMENT OF 3 D-AHF WITH 55KW MOTOR
16	A594195	GENERAL ARRANGEMENT FOR 50NCWBH ZVH1 DRIVE
17	A594200	GENERAL ARRANGEMENT FOR 75NPCWBH ZVH1 DRIVE
18	SVTC25041A05	BACKLINER - SVTC25041
19	SVTC25041A05	BACKLINER - SVTC25041
20	SVTC25041E24	BACKLINER - SVTC25041
21	SVTC25102NE02	COLUMN - SVTC25102N
22	MK428759AE02	CL & CR DRIVE D225S/M FRAME
23	MK428795AE02	MOTOR SLOT COVER- CR
24	MK428800AE02	6/6 TC DRIVEGUARD - CR
25	MK428948AE02	250 MCU LITING BRACKET KIT
26	MK428988AE62	END COVER
27	MK429344AE02	14/12G-AHPP TRANSPORT CRADLE
28	MK429522AE02	250 MCU LITING BRACKET
29	MK429536AE02	250 MCU LIFTING BRACKET KIT
30	MK429672AE02	SPIGOT
31	MK429702BE02	Saddle Clamp
32	MK482883AE02	DRIVEGUARD
33	MK482905AE02	COU ING GUARD
34	MK483170AE02	TYNE FRAME - DRIVE SIDE
35	MK483200AE02	SAVAGE RIVER TRANSPORT FRAME 2
36	MK483218AE02	COU ING GUARD
37	MK483311AE02	DRIVEGUARD
38	TY024-17D21	END COVER TY024-17
39	GA-8618-SD	IMPELLER, METAL 4 VANE, 42.DIA W/4 FR EXP #11ME
40	11033037	,NO AIR BOOST
41	11034328	CONE,LOWER,INSERT,SPECIAL
42	04018CVXR55	COVER LINER
43	MK1203289AS98	FEED CHAMBER EXTENSION, 150CVX-BP
44	MK1203288AS98	TRANSITIONAL CONE, 150CVX-BP
45	ZA09006149	SPIGOT GASKET 400/500CVXT10
46	ZA09006293	400CVXT10 VORTEX GASKET
47	TRAIN17026227	Pump Spare_EPR_PART_DESCRIPTION_
48	10051CVXAP62	OVERFLOW BEND
49	10064CVX30Z14	SPIGOT LINER
50	10064CVX35Z14	SPIGOT LINER
51	10064CVX40Z14	SPIGOT LINER
52	10064CVX45Z14	SPIGOT LINER
53	10064CVX50Z14	SPIGOT LINER
54	10064CVX55Z14	SPIGOT LINER
55	10064CVX60Z14	SPIGOT LINER
56	10064CVX65Z14	SPIGOT LINER
57	10064CVX70Z14	SPIGOT LINER
58	10064CVX70Z53	SPIGOT LINER
59	10064CVX80Z14	SPIGOT LINER
60	10080CVX100U03	VORTEX FINDER
61	10080CVX100Y14	VORTEX FINDER
62	10080CVX110U03	VORTEX FINDER
63	10080CVX110Y14	VORTEX FINDER
64	10080CVX60U03	VORTEX FINDER
65	10080CVX60Y14	VORTEX FINDER
66	10080CVX65U03	VORTEX FINDER
67	10080CVX70U03	VORTEX FINDER
68	10080CVX70Y14	VORTEX FINDER
69	10080CVX80U03	VORTEX FINDER
70	10080CVX80Y14	VORTEX FINDER
71	10080CVX90A12	VORTEX FINDER
72	10080CVX90U03	VORTEX FINDER
73	10080CVX90Y14	VORTEX FINDER
74	TRIO17004302	CT1030 Jaw Crusher
75	TRIO17004303	Frame
76	TRIO17004304	Front wall
77	TRIO17004309	Side Wall
78	TRIO17004311	Stiffener (I)
79	TRIO17004312	Foot
80	TRIO17004316	Jack Pad
81	TRIO17004319	Back Wall Brace
82	TRIO17004320	Stiffener
83	TRIO17004314	Back Wall
84	TRIO17004322	Spring Keeper Seat
85	TRIO17004323	Spacer
86	TRIO17004325	Reinfore cross member
87	TRIO17004334	Flywheel
88	TRIO17004333	Flywheel Assembly
89	TRIO17004335	Counterweight
90	TRIO17004337	Sheave
91	TRIO17004336	Sheave Assembly
92	TRIO17004340	Pitman buffer (CT1030)
93	TRIO17004341	Pitman
94	TRIO17004342	Positioning block
95	TRIO17004345	Toggle seat buffer (CT1030)
96	TRIO17004346	Adjustment extension rod
97	TRIO17004326	Tension rod
98	TRIO17004327	Round steel Bar
99	TRIO17004328	Lower tension spring keeper
100	TRIO17004329	Upper Spring Keeper
101	TRIO17004331	Eccentric Shaft
102	TRIO17004349	Guard
103	TRIO17004350	Stiffener
104	TRIO17025817	CT1030 Encasement Frame
105	TRIO17004588	Stiffener
106	TRIO17004595	Brace
107	TRIO17004930	CT1030 Jaw Crusher
108	TRIO17004931	Frame
109	TRIO17075562	Bushing
110	TRIO17075561	Motor pulley
111	TRIO17003969	Track
112	TRIO17004026	CT1040 Jaw Crusher
113	TRIO17004027	Frame
114	TRIO17004028	Front wall
115	TRIO17004033	Side Wall
116	TRIO17004035	Stiffener (I)
117	TRIO17004036	Foot
118	TRIO17004037	Stiffener (II)
119	TRIO17004038	Housing Seat
120	TRIO17004044	Jack Pad
121	TRIO17004047	Back Wall Brace
122	TRIO17004042	Back Wall
123	TRIO17004055	Reinfore cross member
124	TRIO17004056	Feed Chute Mount
125	TRIO17004067	Flywheel Assembly
126	TRIO17004068	flywheel
127	TRIO17004069	Counterweight
128	TRIO17004078	Pulley Assembly
129	TRIO17004079	grooved pulley
130	TRIO17004084	Buffer upper
131	TRIO17004085	Pitman
132	TRIO17004086	Positioning block
133	TRIO17004089	Buffer lower
134	TRIO17004057	Frame bearing housing cover (left hand)
135	TRIO17004059	Eccentric shaft
136	TRIO17004060	Grease Keeper
137	TRIO17004063	Bearing housing
138	TRIO17004064	Frame bearing housing cover (right hand)
139	TRIO17004066	Shaft cover
140	TRIO17025820	CT1040 E184
141	TRIO17035300	Bearing Housing(RH)
142	TRIO17036369	Frame
143	TRIO17056086	Drive sheave
144	TRIO17004148	CT1048 Jaw Crusher
145	TRIO17004149	Frame
146	TRIO17004150	Front wall
147	TRIO17004155	Side Wall
148	TRIO17004157	Stiffener (I)
149	TRIO17004158	Foot
150	TRIO17004040	Triangular Stiffener
151	TRIO17004159	Stiffener (II)
152	TRIO17004041	Stiffener (III)
153	TRIO17004160	Housing Seat
154	TRIO17004164	Jack Pad
155	TRIO17004049	Guider(I)
156	TRIO17004050	Guider(II)
157	TRIO17004167	Back Wall Brace
158	TRIO17004051	Stiffener
159	TRIO17004162	Back Wall
160	TRIO17004052	Spring Keeper Seat
161	TRIO17004053	Spacer
162	TRIO17004169	Reinfore cross member
163	TRIO17004170	Feed Chute Mount
164	TRIO17025823	lubrication block
165	TRIO17004185	Flywheel Assembly
166	TRIO17004186	Flywheel
167	TRIO17004187	Couterweight
168	TRIO17004189	Sheave Assembly
169	TRIO17004190	Sheave
170	TRIO17002822	Socket Wrench ( 4)
171	TRIO17002823	Socket
172	TRIO17002824	Hex head
173	TRIO17002825	Arbors
174	TRIO17002826	Handle
175	TRIO17004192	Pitman buffer (CT1048)
176	TRIO17004193	Pitman
177	TRIO17004194	Positioning block
178	TRIO17004171	Toggle seat buffer (CT1048)
179	TRIO17004072	Retain block
180	TRIO17004073	Extension bar

#forging rock crusher parts #high chrome crusher parts #stone crusher parts suppliers #crusher machine spare parts #crusher spare parts manufacturers #crusher machine parts name

Why Choose ONA for Your Crusher Parts?

2026-02-04

ONA Company specializes in providing high-quality crusher spare parts, covering mainstream models such as HP cone crushers, GP cone crushers, CH/CS cone crushers, and C-series jaw crushers. Our best-selling parts list details over 500 commonly used spare part numbers, including critical wear parts such as liners, wear plates, guard plates, and side plates.

All spare parts are manufactured from high-quality materials and undergo rigorous heat treatment and precision machining processes to ensure high hardness, wear resistance, and impact resistance, effectively extending equipment lifespan and reducing downtime. We support multiple model compatibility, with clear and standardized part numbers for easy customer inquiry and quick procurement.

We are committed to providing reliable and efficient crushing solutions for the global mining, aggregate processing, and construction demolition industries. With stable supply channels and comprehensive after-sales support, we have become a trusted spare parts partner for numerous customers. For specific part number inquiries or technical selection assistance, please feel free to contact us.

Best-selling part number

HP Cone Crusher Spare Parts No.					GP Cone Crusher Spare Parts No.
N90258013	7090228205	7013355750	7088010082	1062440045	916186	418460	927182	949617145000	171564
7090258001	N90228303	1068634853	7088010081	1062440048	916187	949641826000	949628504600	171644	171565
7090258000	N90228304	1068633366	1093030108	1062440044	916231	949640515600	171650	MM0318231	171551
N90258017	N98000223	1068634887	1093040030	N35410803	MM0310111	932953	932429	944415	949617145700
1093040116	N98000027	1068634890	1093050058	N35410851	936406	915371	907733	MM0528233	949617145600
N90258006	7090228301	N13357502	1093070045	7090258402	MM0310133	447394	MM0550526	MM0304737	949617145500
N90258019	1093050023	N98000018	N88010100	1093020055	916173	446209	905243	585351	285344
N98000013	1093080217	N13357503	N88010103	7090258400	MM0528601	495277	MM0317269	186001	285417
N98000135	7015655250	N13357505	1094260037	1093030219	MM0260020	447582	MM0316922	581710	933615
N98001307	1022072951	MM0902181	1094260037	7090258401	MM0262457	582445	188319	587867	933617
N90259022	1022073307	1068636577	1094260037	N90258408	MM0262456	285150	MM0531942	MM0519772	933619
N90259008	1022074069	7090018008	1094280065	N90258415	MM0301237	949628505000	186002	949628506200	MM0228922
N90058031	1022074809	7090018006	1094280065	N90258412	418481	949620396800	189495	949620310900	908527
7090058013	1022075464	7090018004	1093070001	1093040040	949641827400	932485	MM0532500	MM0315148	MM0253263
N90058041	N15607253	N90018011	7041068006	N90258405	312150	915054	580972	942951	MM0227358
N90058060	N15652258	1093050095	7041068005	N90258414	932594	MM0259738	MM0300690	MM0537909	MM0266967
MM0901565	N15607252	1093080079	1019559606	N90258403	MM0539993	MM0297358	MM0592922	931714	189276
7090058000	N15607254	1022061401	N41060200	N90258406	908632	292715	MM1012991	292722	MM0315854
N98000001	1036829652	1022063300	1019559607	N05502281	341336	285791	705303970000-LOC	MM1004069	188325
MM0901559	1036833869	1022062210	N41060201	7002445751	315929	189597	705303976000-LOC	MM1004014	MM0227940
N90058026	1036803301	1022065500	1019559608	N02445787	MM0577438	MM0259617	933411	MM0315834	931619
N98000002	1036831535	1022066795	N41068015	MM0232736	312707	923946	933638	MM1126588	931651
7090058015	1036831570	N98000857	N41060203	1003894082	341573	MM0524454	933640	186180	MM0239535
N90058049	1036831560	N98000024	7029550009	MM0374877	582422	MM0538260	MM0229040	580006	MM0237852
7090058016	N35410853	N15605001	N98000041	1063917032	285143	292723	908603	189534	MM0594685
N98000488	N35410802	N15606251	N29550017	1063917031	949617139100	MM0269407	MM0229904	MM0253693	186075
7024950501	N35410855	N90248027	N29550019	1063917418	932561	292724	MM0585248	MM0285010	939752
1057612000	N35410850	7012504003	N98000300	1063437878	949617144700	285869	MM0539639	582418	MM0239996
MM0901619	1036829635	1061871854	7012080200	1063437879	188802	582471	295251	MM0318508	939756
7024950500	N63002600	7012504002	1063914005	1063437880	189518	922788	MM0227690	582415	582348
N24950507	1036833868	1061871853	1063914652	1063437875	MM0259100	MM0316348	MM0278696	MM0228712	949628505700
N98000005	1037071002	N12504023	1063915676	1063437877	188321	MM0284068	MM0244592	MM0228785	MM0208999
MM0901571	N63002402	1061873403	1063915668	7033100016	MM0259894	MM0524133	292720	949617145400	908718
1057605158	1036831195	N12504022	1063915673	7033100015	914990	MM0228204	285866	MM0208159	MM0315433
1057605124	1036831527	1061876294	N12080208	1062807443	MM0528581	MM1011329	948430	933605	188322
N24950511	N63004000	N12504019	N12080203	1057602103	MM0592679	285852	931463	MM0537743	MM0314839
N24950509	1036831550	1061877930	N12080207	1057612102	949617145100	MM0581820	581211	MM0267450	MM0262147
N98000256	1036831540	N12504012	N12080210	N98000845	285340	706301319000	MM0230391	949638682930	186066
1057612434	7013308500	N12504020	N12080205	1057612200	945072	996804000010	295460	949628506300	MM0302905
7015656202	7013308001	7043358005	N12080212	1057602250	MM0315432	N02445792	MM0530236	MM0218088	949641828500
1022145719	7013308252	7043358004	7065558000	N98000225	MM0224945	N02445793	582397	949690808328	418658
1022145730	N13308257	7043358002	N65558054	N98000221	MM0221860	406202557385	582419	949618831627	933335
7015656200	N13308703	N43358027	7065558051	N74129030	949628505900	706202557900	MM0228727	949618601658	909071
1022145975	1068863509	7043358008	7065558050	N74129029	MM0309924	706202557951	MM0228791	949620310700	MM0539783
N15656207	MM0904079	7043358009	N98000821	N98000028	292718	406202557730	932814	912036	MM0543054
N98000003	1068867278	1031136156	7065558093	N98000224	MM0300506	285184	MM0538053	295445	446421
1022147349	N13308705	7043358003	N65558321	N74129020	285809	952431	910447	582292	MM0577429
1022147350	MM0904170	N43358015	N98000008	N98000089	582298	952429	495349	582729	949640452900
1022147321	1068868598	N43358017	7065558094	N98000032	CH/CS Cone Crusher Spare Parts No.
N15655252	7039608500	1031136180	1055981158	1062807444	442.8314-901	442.6183-01	442.8362-01	442.7103-01	442.7926-01
N15656214	1073810178	N43358024	N65558201	N98000021	442.8553-00	442.9685-01	442.7976-01	442.8801-01	442.7142-01
N98000489	7039608250	1031143420	N65558252	N33100021	442.8093-901	442.7921-01	442.8520-00	442.9272-01	442.8729-01
N15656213	7039608251	N43358025	1055981159	N53129005	442.7908-901	442.8068-01	442.9164-01	442.7929-01	442.9246-01
1022147723	1073811444	N43358030	1055981161	N53128502	452.0230-902	442.8733-01	442.8753-01	442.7106-01	442.6134-01
1022147711	1073814256	N43358026	N98001023	1063518520	452.4125-00	452.4191-001	452.3841-001	452.4151-001	442.7949-01
1022147721	1073817084	N43358031	7065550291	1063518530	442.7450-01	452.4192-001	452.0266-001	442.9568-00	442.9966-901
7039608500	1073817098	N43358028	N65558322	1063518785	442.6777-01	452.4193-001	452.0553-001	442.6798-00	442.7506-01
1048721001	1022130524	1031143668	7022102001	1063518790	442.7902-01	442.7923-01	442.9568-00	442.7984-01	452.4127-00
N98000792	1022130525	N90155810	1038067315	1057605169	442.7100-01	442.7924-01	442.6798-00	442.7190-01	442.8764-01
7035800600	N98000093	N02445269	7022102502	1057605172	452.0918-001	442.7925-01	442.7984-01	442.8075-00	452.1619-01
N98000706	1022133692	N02445269	1038067401	1057605168	442.7591-00	442.9642-01	442.7190-01	442.8812-00	442.9980-01
N98000051	1022139802	N90155811	1038069595	1057605167	442.6816-00	442.9406-01	442.8075-00	442.1060-01	442.9660-00
N39608258	1022139576	N02445275	1038069733	N74129032	442.8313-901	442.9643-01	442.8812-00	452.1060-001	442.9667-00
N39608301	7084101513	N02445272	N22102506	N74129031	442.8313-902	442.8067-01	442.1060-01	442.6139-01	442.9663-00
N35800601	1048516271	N02445271	N98000091	1057612405	442.7259-00	442.8824-01	452.1060-001	442.7893-01	442.8726-01
1048723201	N98000924	N02445267	N98000092	1057612407	452.1699-901	442.8825-01	906.0141-00	442.7122-01	442.9255-00
N39608804	1048514410	N98000063	N22102505	N33100018	452.1699-902	452.0807-001	906.0377-00	442.8730-01	442.8363-01
N39608808	N98000094	N02445281	N22102507	N33100019	452.4130-901	442.6130-01	442.9389-00	452.0538-001	442.6473-01
N39608805	N84101518	MM0235245	N98000232	1062807442	452.4130-902	442.7927-01	442.6217-01	442.9724-01	442.9408-01
1048724025	1048516272	7081108007	N98000329	N16200143	442.6140-01	452.4188-001	442.7911-01	442.6137-01	442.8754-01
7016200106	1048516296	N98000970	N98000330	N16200139	442.7913-01	442.7107-01	442.7115-01	442.7894-01	442.9266-01
N16200121	N84101519	7080200502	N22102708	N16200150	442.7117-01	442.8761-02	452.0269-001	442.7121-01	442.8425-01
N16200115	N98000323	7081108004	N22102710	1062440046	442.8792-01	442.9872-01	452.0938-001	442.8731-01	442.8793-01
7016200102	1048517581	N80200505	1063518780	N02150052	BG00325390	442.7889-01	452.0936-901	442.9722-01	452.0687-01
7090228102	MM0214352	N98000055	1063518480	N02150053	452.0505-001	442.7163-01	442.9596-01	442.6138-01	442.9313-01
7016200114	MM0237492	N81108011	N53125506	1059420079	442.6127-00	442.9873-01	442.8245-01	442.7895-01	452.0419-001
N16200123	MM0237480	N80200506	1063518725	7035410601	442.9535-00	442.7892-01	442.8008-01	442.7120-01	442.6906-01
1086428322	7002480785	1061940191	1063518815	N81108010	442.9533-01	442.7166-01	442.7485-01	442.8732-01	442.8017-01
1086428470	N02150060	N80200504	N53125502	1061940190	442.7802-00	442.9872-01	442.7484-01	452.0507-001	442.7102-01
N16200142	N02150061	1019891330	N53125503	N80200507	442.7093-01	442.7889-01	442.8823-01	442.6193-01	442.8802-01
1063518943	1063518930	1063518950	1063518832	7074129001	442.8723-01	442.7163-01	442.8863-01	442.7918-01	442.9271-01
					442.9311-00	442.8722-01	442.9520-01	442.8333-01	452.0930-001
					442.6152-01	442.9253-01	442.9570-01	442.8791-01	442.6194-00
					442.7912-01	442.7912-00	442.7105-00	442.8800-00	442.6194-01
					442.9270-00	442.6145-01	442.8020-01
C Series Jaw Crusher Parts Number
Model	Description
	Flat Plate	Wear Plate	Protection Plate	Cheek Plate, Upper	Cheek Plate, Lower	Side Plate
C63	418835	904454	949648790100	949648780000	949648779900	939018
						939019
C80	922446		914638	922261	922262	939026
			902744			939025
C95	578658	934222	578188		940243	578135
		942112	940009			578136
			946470
C96	934220	934501	946470	934192	940243	578136
	578658		940009			578135
C100	418708	418748	495126	949648724100	949648724200	939032
	418778					939031
	418773
C106	591207	MM0527777	MM0572584	570392	MM0213245	MM0545232
			MM1122433
	MM0571766	MM0236911	MM1121908	MM0373727	MM0373726	MM0545064
			940009
C110	418810	446654	447297	901528	901531	939934
	447329	N11893199	447298
	941451	579521	901693			939936
	418937	578906	904485
	447347		MM0217040
C116	591207	MM0542194	MM0224887	589972	589965	MM0500690
			MM0209852			MM0500691
C120	591207	MM0539594	MM0588687	MM0514485	901528	MM0524575
			MM0581913			MM0524576
			MM0516563
C125	940707		MM0234467	949648704900	949648705000	939045
			410882
			949648707200
			MM0234468			939043
			MM0234469
C130	495070	MM1004659	MM1102577	949648704900	MM1036659	MM1079488
			MM1004659
			MM1006284			MM1079490
			MM1052430
C140	418655	580177	MM0201096	930654	M0200928	MM0211656
	495070		499037
	418937		928709			MM0211655
			MM0201703
C145	418655		906150	905489	MM0200765	MM0210526
	418810		906151
	495070		MM0201703	905492		MM0210528
	418937
C150	418810	580317	MM0567241	MM0586529	MM0584720	MM1030662
	495070		MM0577767			MM1030660
	418655
C160	418810	949641825500	447156	576974	949647154300	576949
	418937	576988	447157			576950
C200	917614	918238	923155	917296	917292	MM0216562
	918807		917435	917307		MM0216564
	418778		917439
C3045	418937	585838	585841	585352	585354	587495
	921311		585838	585353		587496
	917001

If you need anything, you can contact me anytime.

#Metso Hp 200 Cone Crusher #Crusher Jaw Plate #Ch440 Sandvik #Metso Gp100 Crusher #Cone Crusher #Crusher lists

Where Are V-Grooves Mainly Used? ZYCO Introduces Its Application Value and Scope

2026-01-30

In metal fabrication, architectural decoration, and industrial manufacturing, the term “V-groove” is frequently mentioned. Yet for many people, it remains both familiar and confusing：
Some understand a V-groove as a welding bevel, others see it merely as a decorative line, while many only encounter it in bending processes.

In reality, the purpose of V-grooves is quite clear, but it's essential to distinguish between different application scenarios. This article will explain clearly from a practical production perspective: what V-grooves are used for, and where they are suitable for use.

1. The Core Purpose of V-Grooves: Enabling High-Quality Bending

In the sheet metal industry, the primary function of a V-groove is as a pre-bending process.

By machining V-grooves at the bending line of the sheet metal using a grooving machine, it is possible to:

· Reduce bending force

· Significantly minimize the bending radius (R angle)

· Prevent surface marks, wrinkling, or distortion in thin sheets

· Improve consistency in bending angles and dimensions

As a result, V-grooves are widely used in:

· Stainless steel door frames

· Elevator decorative panels

· Metal cabinets and enclosures

· Architectural decorative trims

Especially in thin sheet processing from 0.6–2.0 mm, V-grooving is a key process for achieving superior surface appearance and sharp edges.

2. When Is a V-Groove Used for Welding ?

It is important to note that not all V-grooves are intended for bending.

In welding applications, a V-groove usually refers to a welding bevel, mainly used for:

· Medium-thickness or thick plate welding

· Structural components requiring full weld penetration

· Parts with high load-bearing or strength requirements

These V-grooves are typically produced by cutting, milling, or plasma processing, with the goal of ensuring weld strength, not appearance or bending performance.

In contrast, V-grooves machined by sheet metal grooving machines focus on dimensional accuracy, groove consistency, and post-bending quality.

3. What Are the Advantages of V-Groove Panels?

In architectural and interior decoration, V-groove paneling is also widely applied.

Machining V-grooves directly onto metal or decorative panels using mechanical methods offers the following advantages:

· Straight, clean lines with uniform depth

· A seamless appearance without relying on manual joints

· High consistency in mass production

· Enhanced depth, texture, and modern visual appeal

For metal decorative panels, door trims, and wall cladding, V-groove panels combine aesthetic value with industrial production stability.

4. What Is the Difference Between V-Groove and Shiplap?

Although V-groove and shiplap are often mentioned together in decorative applications, they are fundamentally different:

V-Groove：
· Formed by grooving with a grooving machine or by mechanical processing

· Emphasizes line precision and industrial consistency

· Better suited for metal and automated production

Shiplap：
· Created by overlapping boards to form gaps

· Focuses more on structural layering

· Commonly used in wood or lightweight decorative materials

From a metal fabrication perspective, V-grooves align better with standardized and automated manufacturing.

5. How Is V-Groove Different from Beadboard?

Beadboard typically features dense, rounded decorative grooves and places greater emphasis on decorative style and visual detail.

In comparison, V-grooves offer:

· Clean groove geometry with sharp angles

· Crisp, modern visual lines

· Easier control of machining precision

In industrial sheet metal and modern architectural design, V-grooves have a broader range of applications and better compatibility with metal materials.

Summary: V-Grooves Are Not Just Decorative Details, But Also a Processing Capability

Whether in bending processes, welding preparation, or architectural decoration, the essence of a V-groove lies in controlled material processing.

For the sheet metal industry, V-grooving is no longer merely an “appearance enhancement,” but a critical capability that helps to:

· Improve bending quality

· Ensure batch consistency

· Reduce rework rates

· Enhance overall product competitiveness

All of this depends on stable, high-precision V grooving equipment.

If you are producing door frames, decorative panels, or any metal products with high requirements for straightness and bending accuracy, V-grooving is a process you simply cannot afford to ignore.

#Iron plate grooving machine #metal grooving machine #grooving machine for sheet metal #v grooving machine manufacturers #Stainless Steel V Slotting Machine #Vertical grooving machine #v-shaped slotting machine #cnc v grooving machine #v grooving machine

« Prev
1
...
7
8
9
...
47
Next »